Clicky

2026 Edition

ASE A8 Practice Test

Take this free ASE A8 Practice Test to study for your ASE A8 certification exam.

The National Institute for Automotive Service Excellence (ASE) identifies Engine Performance as an individual service area for certification (A8). The diagnosis and repair of the following subjects are covered:

  • General Diagnosis
  • Ignition Systems
  • Fuel, Air Induction and Exhaust Systems
  • Emission Control Systems
  • Computerized Engine Controls
There are 60 questions on the exam, 50 of which are scored, and 75 minutes is given to complete it.

To prepare for the ASE A8 exam, use Tests.com's ASE A8 Practice Test. It is written by Dr. John Kershaw, an ASE test question developer and ASE Certified Master Technician. Our interactive test platform allows you to simulate the exam. Take as many practice tests as you need. There's no time limit or recurrent charges.
 

If you are interested in obtaining more than one ASE A Series certification, use our Complete A1-A8 Practice Test Kit with 800 questions.

General Engine Diagnosis 

1 Which of the following should be the first step in diagnosing an engine performance concern?
Incorrect. Please choose another answer.
You need an accurate description of the customer's concern and the owner is the source.

Study Online Instantly

ASE A8 Practice Test Kit

Click to Save 50% Now

2 Using a diagnostic strategy for a drivability concern, which of the following is generally the last step in that process?
Incorrect. Please choose another answer.
Verifying the repair is always the last step in making sure the repair was complete.
3 Technician A says paper service manuals are still used in today's service world. Technician B says to follow the recommended service procedures contained in the on-line service information. Who is right?
Incorrect. Please choose another answer.
Virtually all OEM service information is accessed via the Internet. Technician A is wrong because paper service manuals are currently obsolete.
4 When looking for specific service information, what vehicle information is needed to locate the information?
Incorrect. Please choose another answer.
On almost all data services you must have the make, model and year.

Ignition Systems Diagnosis and Repair 

5 A NO START condition is being diagnosed on a vehicle with electronic fuel injection (EFI) and distributorless ignition. Technician A says you should only use a DMM (Digital Multimeter) to check voltage values on PCM (Powertrain Control Module). Technician B says you should use a tool to check for spark at one of the spark plugs. Who is right?
Incorrect. Please choose another answer.
Both technicians are correct.

Study Online Instantly

Complete ASE A1-A8 Practice Test Kit

Click to Save 50% Now

6 What is being done in the illustration?
 
Incorrect. Please choose another answer.
The illustration shows an ST125.
7 Technician A says an engine could misfire under load if the ignition coil is tracked. Technician B says the pickup coil must dielectric grease under it. Who is right?
Incorrect. Please choose another answer.
Both technicians are correct.
8 A 12 volt test light is connected from the negative primary coil terminal to ground on an electronic distributor ignition (DI) system. The light flutters while cranking the engine. A spark tester does not fire when it is connected from the coil secondary wire to ground while cranking the engine. Which of the following is the MOST likely cause?
Incorrect. Please choose another answer.
The test light going off and on indicates that the ignition coil triggering device is working but the failure of a spark indicates a coil failure.

Fuel, Air Induction and Exhaust Systems Diagnosis and Repair 

9 Two technicians are discussing emission diagnosis. Technician A says an ignition misfire will increase CO and HC emissions and set a DTC (Diagnostic Trouble Code). Technician B says a misfire caused by a lean condition will increase HC and CO emissions without a DTC set. Who is right?
Incorrect. Please choose another answer.
Technician A is correct because all misfires set a Specific DTC and will increase HC and CO. Technician B is wrong because a lean misfire also sets a DTC and will not increase HC and CO.
10 A scan tool is being used to check fuel injector balance. Based on service manual procedure, what is the expected result if the injector is functioning properly?
Incorrect. Please choose another answer.
Engine RPM will decrease as each injector is turned off unless there is a fault in the cylinder. There will be no change in coolant temperature.

Study Online Instantly

ASE A8 Practice Test Kit

Click to Save 50% Now

11 During an injector power balance test, a technician finds one injector has failed but is receiving a good power supply. What should be done next?
Incorrect. Please choose another answer.
The recommendation by most ESM is to do a continuity check between the PCM and injectors, when adequate power is available to the injector.
12 Which of the following could cause a vehicle to run poorly after the battery was discharged or disconnected?
Incorrect. Please choose another answer.
If battery power is lost the learned value from the RAM may be lost. RAM data is electronically retained which means that it is always to some extent volatile; that is, data storage could be described as temporary - if the circuit is opened, RAM data is lost. It should be noted that most PCMs use only fully volatile RAM. In other words, when the ignition circuit is opened all RAM data is dumped. A second type of RAM is used in some PCMs. This is non-volatile RAM (NV-RAM) (or KAM-Keep alive memory) in which data is retained until either the battery is disconnected or the PCM is reset, usually by depressing a computer reset button, which temporarily opens the circuit. Codes and failure strategy (action sequence) would be written to NV-RAM and retained until reset.

Emission Control Systems Diagnosis and Repair 

13 Technician A says a crushed PCV hose affects idle on some engines and also can cause an oil leak. Technician B says when checking crankcase pressure at 2500 RPM, the PCV system should show a slight pressure in the crankcase at idle. Who is right?
Incorrect. Please choose another answer.
Technician A is correct because on many engines the PCV provides a portion of the idle air and if it is restricted it creates positive crankcase pressure which will push the engine oil out of the engine. Technician B is wrong because the PCV system should create a slight vacuum in the crankcase at 2500 RPM.
14 Technician A says if the PCV valve is clogged, the engine could have a rough idle. Technician B says if the PCV valve rattles, then it does not need to be replaced. Who is right?
Incorrect. Please choose another answer.
Technician A is correct because a portion of the idle air is furnished by the PCV system. Technician B is wrong because the rattle alone does not dictate proper operation.

Study Online Instantly

Complete ASE A1-A8 Practice Test Kit

Click to Save 50% Now

15 A technician suspects the EGR (Exhaust Gas Recirculation) valve is closed. Which of the following would indicate a closed EGR valve?
Incorrect. Please choose another answer.
Spark knock is a symptom of an EGR valve that is always closed. The other choices are wrong because they are symptoms of an EGR valve that is always open.
16 The plastic sensors on an electronically controlled EGR valve have melted. Technician A says excessive back pressure caused by a partially clogged exhaust system could be the cause. Technician B says to always check for a restricted exhaust whenever replacing a failed EGR valve sensor. Who is right?
Incorrect. Please choose another answer.
Both technicians are correct.

Computerized Engine Controls Diagnosis and Repair 

17 This question has the word EXCEPT. For this question, look for the choice that could NOT meet the described situation. Read the entire question carefully before choosing your answer. Long-term fuel trim is a Self-Learned value. Disconnecting the MAF sensor or using a scan tool can clear a learned value. Many fuel system and emission components have a direct effect on the air/fuel mixture ratio. Self-Learning Control should be cleared each time any of these components have been replaced or repaired, EXCEPT:
Incorrect. Please choose another answer.
PCV valve is the exception because it has a very indirect effect on the air/fuel mixture ratio and is not an electronic component.
18 The OBD II (On Board Diagnostic Level 2) system on a vehicle interprets a disconnected spark plug as a misfire that could damage the three-way catalyst. On which trip will the ECM or PCM MOST likely turn on the Malfunction Indicator Lamp (MIL)?
Incorrect. Please choose another answer.
It is most likely that on the first trip a misfire condition can occur that can damage the three way catalyst (TWC) due to overheating. Specific on board diagnostic items will cause the ECM to light up or blink the MIL, and store DTC and Freeze Frame data, even in the 1st trip; e.g., Misfire (Possible three way catalyst damage) - DTC: P0300 -P0306 is being detected.

Study Online Instantly

ASE A8 Practice Test Kit

Click to Save 50% Now

19 Technician A says the on-board self-diagnostics test mode procedures should be conducted on a cold engine. Technician B says many diagnostic trouble codes (DTC) will monitor items only when the engine control system is in closed loop. Who is right?
Incorrect. Please choose another answer.
Technician B is correct because many diagnostic trouble codes (DTC) will monitor items only when the engine control system is in closed loop. Closed loop operation requires the engine to reach a certain operating temperature before it can be entered. Technician A is wrong because the on-board self-diagnostics test mode procedures should be conducted on a warm engine (NOT a COLD engine as stated in the question) that is in closed loop because many DTCs only monitor in closed loop.
20 What component does the PCM or ECM monitor to determine the condition of the catalytic converter and will set a DTC (Diagnostic Trouble Code) if it fails?
Incorrect. Please choose another answer.
On vehicles equipped with OBD II, use of two oxygen sensors is required to monitor catalytic converter efficiency. The front oxygen sensor is located before the catalytic converter (upstream) and the rear oxygen sensor is located after the converter (downstream). During closed loop fuel control, the ECM compares the signals from the two oxygen sensors. One important point to remember is that a rear O2 sensor is used only for diagnostics. It usually has no influence on engine operation or driveability.
Study Online Instantly
Click to Save 50% Now

Related Links

Quality starts with who wrote the material. Our writers:

John Kershaw, ASE Test Prep Expert, is an ASE Certified Master Technician, an auto industry technical instructor and is an ASE Test Question Developer. He is among the first certified by the ASE in 1972.

Actual ASE A8 Topics
ASE identifies engine performance as an individual service area. The engine performance service area involves the components listed below.
The ignition system—Components that ignite the fuel and air mixture at the proper time to create maximum power and minimum emissions.
The fuel system—Components that transfer fuel from the fuel tank to the engine cylinders in the proper amounts so as to create maximum power and minimum emissions.
The exhaust system—Components that remove combustion by-products from the engine.
The emission control system—Components that reduces the amount of harmful gases emitted from the vehicle.

_______________

Number of Questions on the Actual ASE A Series Tests

A1 – Engine Repair (50)
A2 – Automatic Transmission/Transaxle (50)
A3 – Manual Drive Train & Axles (40)
A4 – Suspension & Steering (40)
A5 – Brakes (45)
A6 – Electrical/Electronic Systems (50)
A7 – Heating & Air Conditioning (50)
A8 – Engine Performance (50)
A9 – Light Vehicle Diesel Engines (50)
Copyright © 2009-2025 Tests.com. All Rights Reserved.